Archive for the ‘Earthmoving Equipment’ Category

Advantages Of A Front Loading Washing Machine

Advantages of a front loading washing machine

by

Shelton

United States is not a very keen user of front loading washing machines. However, in other countries most homes use front loading washing machines. They have realized and accepted the bonus features of front loading washers. In this content some of the virtues of front loading washers are upheld for the knowledge of users.

The way you load clothes is the main difference between a front loading washer and top loading washer. The pivoted top of the top loading machine keep your clothes sideways in the drum which is water proof. The machine has the agitator located exactly in the middle. It spins the garment in the detergent and water solution. The front loading machine on the other hand, has paddles mounted on the side. They spin the clothes.

The front loaders do not have agitators in the middle. The front loading washers have automatic locking system. Till the washing process is completed the lock stays in place. Your washing cycle will perform without any interruption to the end. Front loading washing machines can take a larger load than a top loading washer. This is possible because the front loaders do not have an agitator in the middle. The larger capacity of the front loading machines reduces the number of washing cycles.

YouTube Preview Image

Fewer cycles results in less electricity and water consumption, and of course reduced electricity and water bills. The less noisy front loading machines reduce noise pollution to a great extent. Front loading washers are gentler with clothes. In a front loading washer the blades gently collects the clothes and lightly immerse it in the detergent water. It depends on the force of gravity to eliminate dirt. The gentle treatment of the front loader extends the life of clothes. A top loader on the other hand, roughly turns clothes to and fro with the central agitator.

Top loading washing machines as they get older, tends to be noisy and go off balance during a procedure. Front loading washers do not have this problem. Decreased water and detergent usage are other advantages of front loading washers. The top loading machine fills up the entire drum with water. The clothes should stay immersed in water in a top loading machine.

Front loading machines on the other hand, take up water to fill around one third of a drum. The clothes are pulled through the water for best results. Special laundry detergents are made especially for front loading washers. They are gentler and produce better results than other detergents. The special detergents are capable of distributing different elements at different temperatures. They are less soapy than their counterparts.

Lastly, the front loaders sustain an optimal temperature with its special heating component. This ensures the best washing results.

Checkout

best washer

offers, compare prices and read unbiased reviews on

Frigidaire Washing Machines

, Samsung, White knight, White Washing Machines at washing machine reviews website.

Article Source:

ArticleRich.com

No Comments


Stainless Steel And Modern Architecture

Find Out More About:

Stainless Steel and Modern Architecture

by

David Ostendarp

For hundreds of years, all buildings were constructed primarily of wood and masonry. This began to change dramatically in the 18th century when wrought iron and cast iron were introduced as construction materials. Swiftly, a variety of metals took over as the preferred foundation for construction and architecture, a legacy which continues to this day. Iron initially supplanted both wood and masonry because of its superior strength and fire resistance, especially the latter. Several disastrous fires in the latter part of the 18th century led to the development of less combustible buildings which relied on cast iron as a major element of their construction.

Cast iron was also preferred for large public buildings due to the fact that a huge floor could be built with iron supports that prevented bouncing, or sagging in the middle, which was the case for flooring constructed with wooden supports.

YouTube Preview Image

Iron as a primary architectural material was in its turn overridden by the superior attributes of steel, for both sheet metal and supports. Steel is stronger than both cast iron and wrought iron and also has a greater resistance to corrosion.

The advent of the mass production of steel in the 19th century revolutionized architecture, leading to the ability to design and build enormously tall structures such as skyscrapers.

At the beginning of the 20th century, stainless steel was developed. Due to its aesthetic appeal and extremely high corrosion resistance, it became an external feature of much architecture. Buildings in marine environments often choose stainless steel sheeting for their exterior, since the building materials are exposed to corrosive elements. This is not only a concern for the surface area; many structures in such environments also use stainless steel material in their foundations, since the soil will be more corrosive than usual due to salt content.

By far the most well-known use of stainless steel in modern architecture though, is for its luster and visual appeal. The Chrysler Building in New York City is the chief early example of using stainless steel plate for its aesthetic attributes. The Chrysler Building was the first large scale use of stainless steel and was completed in 1930. It proves the superiority of stainless steel material used externally since today, almost one hundred years later, the stainless steel of this world famous building is in near pristine condition.

Another famous modern use of stainless steel material for construction is the Gateway Arch in St. Louis, Missouri. The Arch was designed to last one thousand years, which is one of the primary reasons the architect chose stainless steel. Also, like the Chrysler Building, the steel used in the Arch is to this day still in excellent condition, effortlessly maintaining its striking visual appeal.

Currently, celebrated architect Frank Gehry often chooses stainless steel sheeting to clad his spectacular buildings; the most well known example in the U.S. being the Walt Disney Concert Hall in Los Angeles.

Truly, steel has revolutionized architecture, from the steel used for interior supports and foundations, enabling buildings to rise toward the sky, to the dramatic use of stainless steel plate on buildings’ exteriors, commanding our attention.

Robin Tackett is Owner of Slice of Stainless, Inc. and the author of this article about

sheet metal

and

stainless steel material

.

Article Source:

Stainless Steel and Modern Architecture

No Comments



SetPageWidth